Magewell Pro capture AIO 4K

Capture 4K resolution video with the Magewell Pro Capture AIO 4K Capture Card . This PCI Express x 2 capture card is compatible with DCI 4K and UHD video formats up to 4096 x 2160 and features either SDI + embedded audio or HDMI + embedded audio. Capture 4K uncompressed video from a camera or switcher with the flexibility to use HDMI or SDI for recording, editing or streaming.

Features:

4K at 30 fps
SDI + embedded audio

HDMI + embedded audio

Specifications

< /tr>

< td>

Hardware based 100ns high resolution clock
Audio frames (192 audio samples) and video frames are stamped with hardware clock
Hardware clock can be synchronized between cards (via SDK)

TIMESTAMP &A/V SYNC
SUPPORTED OS	Windows 7/8/8.1/10/2008/2008 R2 /2012 (x86 and x64) Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)
SUPPORTED APIS	< div class="ts-content"> Windows Directshow DirectKS Wave API/DirectSound/WASAPI Linux V4L2 Alsa < /li>
< div class="ts-title"> SUPPORTED SOFTWARE	Vlc Virtualdub Obs XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any other DirectShow/V4L2 encoding/streaming software
INPUT INTERFACES < /div>	Hdmi DVI-D 1.0 < /li> HDMI 1.4 Bnc SD/HD/3G/6G SDI
OUTPUT INTERFACES	PCIe Gen2 x2 < /li>
INPUT FUNCTIONS	Support for input video resolutions up to 4096×2160 pixels
HDMI SPECIFIC FEATURES	297MHz HDMI Receiver Adaptive HDMI Equalizer Support for Custom EDID Support extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames Support for full colorimetry Support for 8-bit signals using RGB/YUV 4:4:4 color sampling at pixel rate not exceeding 297 MHz Support for 12-bit signals using YUV 4: Use 2:2 color sampling at pixel rate not exceeding 297 MHz Support for 10/12-bit signals using RGB/YUV 4:4:4 color sampling at pixel rate not exceeding 170 MHz Support to extract audio shaping information and channel status information Support to extract video timing information Support to extract 3D video format information Support Sony/Canon DSLR timecode extraction Support side-by-side half, top-and-bottom, frame wrapping 3D mode .
SPECIFIC FEATURES OF SDI	Integrated cable equalizer Supports cable lengths up to 230M for HD signals Support for SD/ HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards 2K (2048×1080) and 4K (4096×2160) mode support Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling Support for 10/12-bit color depth n Support for extraction of SMPTE 352 payload identifier Support for up to 8 (mono) audio channels at 48KHz (channels 1-8 of 16 available in the SDI specification) Support to extract audio shaping information and channel status data Limited 3Gb-DS support: only the first stream can be captured Limited capture support from the first link of dual link interfaces: YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60 < li> YCbCr 4:4:4 10-bit: captured as 4:2:2 RGB 4:4:4: R/B subsampled n
VIDEO OUTPUT FORMATS	Support for output image resolutions up to 4096×2160 pixels Support for output frame rates up to 144fps (Actual output frame rate can be limited by PCIe bandwidth & image resolution) Support for 4:2:0 8-bit output formats: NV12, I420, YV12 Support for 4:2:2 8-bit output formats: YUY2, YUYV, UYVY Support for 4:4:4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32 Support for 4 :4:4 10-bit output formats: V410, Y410 More output formats are supported via Pro Capture SDK for DirectKS < /td>
VIDEO PROCESSING FEATURES	< div class="ts-content"> Two video processing pipelines with ~360Mpixels/s processing bandwidth for each one Full 10-bit video processing Video cropping Video scaling Video deinterlacing Weaving Blend top and bottom field Top field only Bottom field only < li> Video ratio conversion Automatic or manual input aspect ratio selection Automatic or manual output ratio selection Conversion modes for three aspect ratios: Ignore (Anamorph), Crop, or Fill (Letterbox or Pillarbox) Video color format conversion < li> Automatic or manual selection of input color format and quantization range Automatic or manual selection of output color format, quantization range and saturation range Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats Support for limited or full quantization range Support for limited, full and ‘extended gamut’ saturation range Video frame rate conversion Video OSD composition PNG OSD image support (up to 4069×2160) Support dynamically loading RGBA OSD image via SDK
MULTIPLE CARDS PER SYSTEM	Support for multiple cards connected to one system Built-in rotary switch to set card number, with 16 positions from 0 to F System Hardware Device Tree displays “01: Pro Capture HDMI 4K” when the rotary switch is set to 1, and so on The names of video and audio devices displayed in your software are contain the map number (set by the rotary switch)
MULTIPLE OUTPUT STREAMS	Unlimited output streams for one input channel < /li> Independent cropping, aspect ratio, color format, resolution, frame rate, deinterlacing, and color matching settings for each individual stream
ULTRA LOW LATENCY SUPPORT	64 video lines latency Partial notification mode in SDK < /td>
VIDEO OUTPUT SG-DMA	~1200MB/s per channel DMA bandwidth in PCIe 2.x system ~800MB/s per channel DMA bandwidth in PCIe 1.x system n Support for Intel tiled GPU surface auto-detection DirectGMA support for AMD video adapter chipsets GPUDirect support for Nvidia video adapter chipsets
SDK < /th>	Pro Capture SDK for DirectShow for easy integration (Windows) Pro Capture SDK for DirectKS for maximum flexibility and performance (Windows)
n WINDOWS DRIVER TWEAKS	All options can be controlled by three levels of registry key: global level, product level and device level Video, Audio, Crossbar filter names can be modified via registry keys
FIRMWARE UPGRADE	Multiple cards in one system can be upgraded at the same time Cards can be upgraded without shutting down the system (in most cases even a restart is not necessary)
LED INDICATOR	Status- LEDs indicate the working status of each channel: idle, input signal locked, memory failed, or FPGA configuration failed.
FORM FACTOR	Low profile PCIe x4 Add-on Card 92.79 x 68.43 mm (without PCI bracket) < /div>
POWER CONSUMPTION	n Maximum current at 12V TBD Maximum current at 3.3V TBD Maximum power consumption TBD
WORKING ENVIRONMENT	Operating temperature: 0 to 40 degrees C n Storage temperature: –20 to 70 degrees C Relative humidity: 5% to 90% non-condensing

Brand

Magewell

Magewell is known for its high-performance video capture and streaming devices. Their products are widely used by broadcasters, educators, and live streamers who require reliable and easy-to-use tools for capturing and distributing video content in real time.

Magewell Pro capture AIO 4K

Excluding VAT

Receive a 1% discount on every order with the code below

Fast shipping

Reliable Customer Service

Buy safely

Excluding VAT

Features:

Specifications

Brand

Magewell

Populair products

HuddleCamHD Pro 4K USB Webcam

Aida UHD-100A Micro POV Camera

Magewell Pro Capture Quad SDI

PTZOptics SuperJoy Controller

PTZOptics Move SE 20X Zoom NDI Tracking – Gray

DZOFilm Pictor Zoom 20-55mm T2.8 Black

Our Deals!

Angelbird Media Pouch

Angelbird USB 3.2 cable CC | 50cm

Angelbird USB 3.2 cable CC | 100cm

Angelbird AtomX SSDmini Adapter Handle

Angelbird AV PRO SD MK2 V60 64GB

Angelbird AV PRO SD MK2 V60 128GB

Customer Service

My Account

About Us