Camera Wall Mount for PTZoptics & HuddleCamHD
Specially made for the PTZOptics 12X, 20X and 30X models, but also suitable for a lot of other PTZ cameras. The platform on which the camera will be placed has a size of 211 mm deep and 145 mm wide. The camera bracket is compact and equipped with a slot that allows you to neatly position the camera in the right place. In addition, there is an opening at the bottom as well as at the wall plate through which you can neatly pass the cabling. So that you can finish the whole neatly during installation.
The wall plate is 145mm x 131mm and made of hard steel, so that the camera remains very still and stable when panning, tilting and zooming. This bracket is easy to hang and adjust thanks to the slotted holes. When developing this bracket, consideration was also given to possible ceiling mounting. You cannot attach this bracket directly to the ceiling, but the bracket is also available in combination with an aluminum profile. A square profile of 45×45 mm with a standard length of 1, 2 or 3 meters, which is fitted with a ceiling plate (always in black) and with which you actually convert the wall bracket into a ceiling bracket with a certain distance from the ceiling.
That is, as far as we know, fairly unique, of course, this combination has been tested and we can say that even with a profile length of up to 3 meters, the camera remains completely stable in position, so you get a neat, quiet picture. can bring. The profiles are also provided with a rubber strip for finishing and the cables can be neatly concealed behind the strip.
No mounting materials are supplied with these Camera brackets, this is because it is never known which surface is present at the location and the manufacturer likes to be environmentally conscious, adding screws and plugs for all situations would lead to a lot of waste.
If you have any questions about this camera mount, feel free to ask us. We are happy to help you. We can be reached by telephone on 070 20 600 22 or by email to info@movisionpro.nl.